JSR has completed the construction of a mass-production plant for producing hydrocarbon electrolytic membranes for fuel cells at its factory site of Yokkaichi City in Mie Prefecture. The production capability of the plant is equivalent to the number of the hydrocarbon electrolytic membranes used by ten thousands to twenty thousands of motor vehicles per year. JSR has already operated the semi-commercial plant for producing the electrolyte membranes.
The mass-production plant has been constructed to meet the full-scale expansion of demand. The electrolyte membranes of JSR have been used for the fuel cell vehicles by an automobile manufacturer in Japan.
The company is scheduled to develop and manufacture hydrocarbon electrolyte membranes for stationary fuel cell systems such as residential fuel cell systems and mobile direct methanol fuel cells.
JSR’s Hydrocarbon Electrolyte Membrane
The JSR’s hydrocarbon electrolyte membrane is designed to have a concentration of ion-exchanging groups which is higher than that of the conventional electrolyte membrane. The result is an excellent proton conductivity. The hydrocarbon electrolyte membrane is designed by fully utilizing the features of the aromatic hydrocarbon structure allowing a high freedom of design.
The results are: high endurance, excellent gas shut-off property, and excellent high- and low-temperature characteristics. Further, the hydrocarbon electrolyte membrane is environment friendly. The hydrocarbon electrolyte membrane, unlike the conventional fluorine electrolyte membrane, is free from fluorine compounds, which are produced in the catalyst recovery process and waste disposal. JSR is developing a new electrolyte membrane, which has long-time stable power generation performance, and is durable against load variations as in the start and stop operations.
Electrolyte Membrane for Vehicle Fuel cells
JSR is developing a new hydrocarbon electrolyte membrane in cooperation with an automobile manufacturer in Japan. In the fuel cell system using the hydrocarbon electrolyte membrane developed by us, high temperature operation, and low temperature start-up have successfully been realized. The power generation temperature region is considerably increased (-30 to 95 degrees of centigrade). It is noted that the JSR’s electrolyte membranes have been used by the vehicle fuel cells where the electrolyte membranes are inevitably placed in extremely harsh conditions. JSR is making efforts to further improvement of the endurance.
Electrolyte Membrane for Stationary Fuel Cell Systems
A hydrocarbon electrolyte membrane for use with residential fuel cell systems has been developed. The development has been made with efforts to make the most of advantageous features of the hydrocarbon electrolyte membrane for automobiles, including good durability, high temperature being usable, good recycability in the catalyst recovery stage.
Electrolyte Membrane for Mobile DMFC
JSR has developed a hydrocarbon electrolyte membrane for DMFC applications.
The balance between the output characteristic and the methanol permeability has been significantly improved. In the previous electrolyte membrane and electrode electrolyte (binder for fixing the catalyst layer), when methanol of high concentration is used in order to increase the output power of the DMFC, the methanol crossover inevitably occurs and the electrode electrolyte inevitably dissolves, leading to degradation of the power generation capability of the fuel cell. The electrolyte membrane developed and offered by JSR enables a designer to use high concentration methanol and to increase the output power of the fuel cell.
* This article is excerpted from JSR's press release.
Keywords: hydrocarbon electrolyte membranes, mass-production plant, uel cell vehicles, high ion-exchanging group concentration, aromatic hydrocarbon structure, high endurance, gas shut-off property, high- and low-temperature characteristics
2009年2月28日土曜日
2009年2月24日火曜日
Sumitomo Corporation Invests in ACAL Energy

ACAL Energy Ltd. has today announced an investment from Sumitomo Corporation, a leading Japanese trading company with substantial business activities in energy, mineral and merchandise trading, through its investment arm SC Green Tech Ventures LLC. The investment is in addition to the previously announced £3.3M fundraising round completed at the beginning of December, led by Carbon Trust Investments and Solvay SA. All funds raised will be used to take the company to the next stage of development of their ground breaking low cost fuel cell systems, based on novel platinum-free cathode technology (FlowCath®).
Fuel cells are a highly efficient and clean energy production technology capable of replacing combustion engines in a wide variety of applications including remote and distributed power, residential cogeneration, as well as automotive and mobile power applications. FlowCath® replaces the expensive precious metal catalyst found in conventional fuel cells with a proprietary low cost liquid catalyst. This not only reduces the cost of the fuel cell, but also provides significant durability and reliability benefits through system simplification, and the elimination of the most common failure mechanisms found in standard fuel cells. The company plans to introduce a 1kW demonstration system in 2009.
Chief Executive Officer, Dr SB Cha said: “We are very fortunate to have an investment from Sumitomo Corporation in this very difficult business environment. We look forward to working with Sumitomo Corporation to deliver ACAL products to the Japanese and other Asian markets in the near future. Sumitomo Corporation is the second blue-chip Japanese company to invest in ACAL and since the Japanese Cleantech market is arguably the most advanced in the world, we view the investment as a very strong endorsement of our technology and market potential.”
ACAL Energy Limited
ACAL Energy is a developer of a new fuel cell technology that will enable low cost and highly reliable fuel cell systems for stationary and remote power, home cogeneration, and automotive and mobile applications. Fuel cells are a highly efficient and clean energy production technology capable of replacing combustion engines in a wide variety of applications including remote and distributed power, residential cogeneration as well as automotive and mobile power applications. FlowCath® replaces expensive precious metal catalyst found in conventional fuel cells with a proprietary low cost liquid catalyst. This not only reduces the cost of the fuel cell but also provides significant durability and reliability benefits through system simplification and the elimination of the most common failure mechanisms found in standard fuel cells. The company was founded in August 2004 by FlowCath® inventor Dr Andrew Creeth and is headquartered in Runcorn, UK.
ACAL Energy is currently funded by CT Investment Partners LLP, Rising Stars Growth Fund (RSGF), NorthStar Equity Investors Ltd., Porton Capital Ltd., Synergis Technologies Ltd., Solvay SA and a major Japanese corporate investor.
For further information, please contact Amanda Lyne at ACAL Energy:
Tel: +44 (0)1928 51581
E-mail: alyne@acalenergy.co.uk
URL: www.acalenergy.co.uk
Tokyo Gas Successfully Develops High Performance catalyst for Fuel Processor
Tokyo Gas has successfully developed a high performance catalyst, and drastically improved a fuel process (for reforming natural gas into hydrogen) by using the new catalyst.
The company has a plan to incorporate the new fuel processor into a next generation ENEFARM (residential fuel cell cogenerator).
The new fuel processor is about 2/3 in volume, and almost halved in manufacturing cost when compared with the previous fuel processor).
Those advantages result from significant simplification of the fuel processor structure and use of the new catalyst.
[Copyright by FuelCell japan]
Significant Simplification of Processor Structure
The structure of the previous fuel processor is complicated to improve the reforming efficiency. To cope with this, the company reduces the number of necessary parts to 1/3, and the total welding line length by 40% (when compared with those of the previous one). The reforming efficiency of the new fuel processor is equal to that of the previous one.
Developed High Performance Catalyst
As known, the fuel processor uses a catalyst for promoting the reforming reaction.
To secure required performances, the old fuel processor needs much catalyst.
This results in the large volume of the fuel processor.
Where the new catalyst developed this time was used, the amount of catalyst required for the reforming was reduced by 30% to 50%. This results in considerable reduction of the processor volume and size, and the manufacturing cost.
Tokyo Gas’s Fuel Processor
Tokyo Gas has developed the fuel processor as well as the fuel cell.
October, 2000 – developed a 1-kW fuel processor of 83% (HHV)
November, 2003 – processor structure was redesigned, the reforming efficiency was improved in low output condition, and the weight was halved.
The company has licensed the result of developed technologies to Ebara-Ballard.
An excellent environmentality of the fuel processor was proved in the large-scale demonstration test project of residential fuel cell cogenerators (started from 2005).
The fuel processor technologies developed this time will be licensed to Ebara-Ballard and others.
The Tokyo Gas's next-generation ENEFARM will be launched in the first half of 2010. The new ENEFARM will be featured by size reduction and reduced price.
Press Release = http://www.tokyo-gas.co.jp/Press/20090223-03.html
The company has a plan to incorporate the new fuel processor into a next generation ENEFARM (residential fuel cell cogenerator).
The new fuel processor is about 2/3 in volume, and almost halved in manufacturing cost when compared with the previous fuel processor).
Those advantages result from significant simplification of the fuel processor structure and use of the new catalyst.
[Copyright by FuelCell japan]
Significant Simplification of Processor Structure
The structure of the previous fuel processor is complicated to improve the reforming efficiency. To cope with this, the company reduces the number of necessary parts to 1/3, and the total welding line length by 40% (when compared with those of the previous one). The reforming efficiency of the new fuel processor is equal to that of the previous one.
Developed High Performance Catalyst
As known, the fuel processor uses a catalyst for promoting the reforming reaction.
To secure required performances, the old fuel processor needs much catalyst.
This results in the large volume of the fuel processor.
Where the new catalyst developed this time was used, the amount of catalyst required for the reforming was reduced by 30% to 50%. This results in considerable reduction of the processor volume and size, and the manufacturing cost.
Tokyo Gas’s Fuel Processor
Tokyo Gas has developed the fuel processor as well as the fuel cell.
October, 2000 – developed a 1-kW fuel processor of 83% (HHV)
November, 2003 – processor structure was redesigned, the reforming efficiency was improved in low output condition, and the weight was halved.
The company has licensed the result of developed technologies to Ebara-Ballard.
An excellent environmentality of the fuel processor was proved in the large-scale demonstration test project of residential fuel cell cogenerators (started from 2005).
The fuel processor technologies developed this time will be licensed to Ebara-Ballard and others.
The Tokyo Gas's next-generation ENEFARM will be launched in the first half of 2010. The new ENEFARM will be featured by size reduction and reduced price.
Press Release = http://www.tokyo-gas.co.jp/Press/20090223-03.html
2009年2月21日土曜日
NexTech Materials Introduces Revolutionary Hydrogen Safety Sensor

NexTech Materials is pleased to announce the launch of its new hydrogen sensor. Designed for hydrogen safety monitoring, this ceramic sensor exhibits a highly sensitive, selective, and rapid response to the presence of hydrogen in ambient air. Prototype sensors have been delivered to strategic partners for validation testing of this revolutionary device. NexTech will begin filling production orders in the fourth quarter of this year.
The NexTech sensor features a compact, rugged design and waterproof connector, and employs a revolutionary chemi-resistive ceramic sensing technology for very reliable hydrogen detection. It accurately measures hydrogen concentrations over a wide range of temperature and humidity variation and provides a repeatable response, even in the presence of other combustible gases. Additionally, the NexTech Hydrogen Sensor is immune to signal saturation upon continuous exposure to low levels of hydrogen, and recovers rapidly and completely upon hydrogen removal, enabling safe generation, distribution, and utilization of hydrogen in wide range of advanced energy and traditional applications.
Field testing of beta prototype sensors is in progress with two companies, both of which are commercializing devices utilizing PEM fuel cells as battery replacements. Target markets include stationary and mobile fuel cell applications, distributed hydrogen generation systems, lead acid battery monitoring, semiconductor fabrication, and many other industrial users of hydrogen gas.
About NexTech Materials
NexTech’s vision is to be a global leader in the development and manufacturing of innovative products for energy and environmental markets. NexTech is a leading developer and supplier of materials, components and services for the fuel cell industry and is dedicated to reducing the manufacturing and operating costs of fuel cells and other electrochemical devices. NexTech’s customers are located in over 35 countries and include leading researchers, developers and manufacturers throughout the world. NexTech Materials, Ltd. was founded as a privately held company in 1994 and has grown into one of Ohio’s leading technology companies. NexTech recently expanded its manufacturing and R&D facilities located in Lewis Center Ohio. NexTech has many products in the pipeline including fuel cell stacks for military and residential power applications, sensors for gas detection and control systems, catalysts for energy conversion systems, and membranes for gas separation devices. For more information, please visit our web site www.nextechmaterials.com.
Contact:
Mr. Tad Dritz
t.dritz@nextechmaterials.com
(614) 842-6606, extension 110
NexTech Materials, Ltd.
404 Enterprise Drive
Lewis Center, OH 43035
2009年2月18日水曜日
Morphic’s Small-scale Wind Turbine in Live Tests

Morphic’s new small-scale wind turbine, SWT20, will now be tested in the toughest possible conditions at the southern end of the island of Öland off the coast of Sweden. The robust 20 kW turbine has been developed for telecom base stations, farms and other demanding applications where reliability and long service intervals are crucial factors. Thanks to Morphic’s advanced blade technology, the turbine is extremely silent and can therefore be used even in built-up areas. During this week SWT20 will also be presented at the World Mobile Congress in Barcelona, one for the world’s largest telecom expos.
One of our time’s biggest challenges is to meet the need for secure electricity and to do so using renewable sources of energy. This applies equally to the industrialized world and developing countries. There, some 1.6 billion people currently live without electricity and another 1 billion live in areas with uncertain access to electricity.
Morphic’s new small wind turbine, SWT20, has been developed for demanding applications in areas where access to electricity is uncertain, such as telecom base stations or farms, hotels and other small businesses. Here wind power can be used as sole source of energy or as a complement to a diesel generator.
SWT20 is the second generation of small-scale wind turbines developed by Morphic. The first SWT20 to be installed has been operating outside Morphic’s head office in Karlskoga since late 2008.
This week another turbine was raised at an organic farm on southern Öland, for testing in the toughest possible wind conditions. Further wind power contracts are in the pipeline.
SWT20 has been designed for a useful life of 25 years with five-year service intervals. It has duplicate security systems and can be controlled remotely, guaranteeing secure operation and control. The turbine has a direct-drive generator and no gearbox, a component which often causes problems. The blades are made from carbon fiber and have been designed to move through the wind almost noiselessly. SWT20 can be mounted on a tower or mast and can supplement an already existing telecom mast. It has been developed according to the IEC 61400 standard (wind class 2).
For more information, please visit here.
This is Morphic:
Morphic is a Swedish engineering group operating in the areas of fuels cells, wind power, fuel cell energy systems and engineering technology. The Group has about 230 employees and conducts operations in six countries – Sweden, Norway, Japan, Greece, Italy and Switzerland. Morphic Technologies’ B shares have been listed on the OMX Nordic Exchange since March 4, 2008, and the number of shareholders is about 28,800.
2009年2月14日土曜日
Further Advanced Micro SOFC Module
Features:
* Operates within a range from 450 to 550 deg. of centigrade
* 1 cm3 (size)
* Natural dispersion of air employed for air supply
* Quick start and stop performance is secured
* 2W/cm3 (power generation density) at 550 deg. of centigrade
If you want to read more, please feel free to contact us at:
http://www.fcpat-japan.com/AboutUs.htm
We don't accept free-mail addresses.
free-mail addresses はご遠慮ください。
* Operates within a range from 450 to 550 deg. of centigrade
* 1 cm3 (size)
* Natural dispersion of air employed for air supply
* Quick start and stop performance is secured
* 2W/cm3 (power generation density) at 550 deg. of centigrade
If you want to read more, please feel free to contact us at:
http://www.fcpat-japan.com/AboutUs.htm
We don't accept free-mail addresses.
free-mail addresses はご遠慮ください。
nano tech 2009 International Nanotechnology Exhibition & Conference

The world’s largest Nano-technology Exhibition & Conference will be held on
February 18 to 20, 2009, at Tokyo Big Site. The number of exhibitors will exceed 50,000. You can meet the cutting-edge technologies and products in those fields.
No admission fee is required if you register in advance at the web site.
Date&Time:
February 18(Wed.) - 20(Fri.), 2009, 10:00 - 17:00
Venue:
East Exhibition Hall 3,4,5,6 & Conference Tower, Tokyo Big Sight, Japan
Organized by: nano tech executive committee
Secretary General:
Mr.Takahiro Matsui, Executive Officer, ICS Convention Design, Inc.
Supported by: Cabinet Office Government of Japan
Ministry of Internal Affairs and Communications
Ministry of Education, Culture, Sports, Science & Technology
Ministry of Agriculture, Forestry and Fisheries
Ministry of Economy, Trade & Industry
Embassy of the United States of America
The Australian Embassy
British Embassy Trade & Investment Department
Embassy of the Kingdom of Belgium
Embassy of Canada
Embassy of France - Economic Department
Finnish Funding Agency for Technology and Innovation (Tekes)
Embassy of the Federal Republic of Germany
Embassy of Islamic Republic of Iran in Tokyo
Italian Trade Commission
Embassy of the Republic of Korea
The Netherlands Embassy
Embassy of Spain - Econimic and Commercial Office
Embassy of Switzerland
National Institute of Information and Communications Technology
National Institute for Materials Science
RIKEN
Japan Science and Technology Agency
National Institute of Advanced Industrial Science and Technology
New Energy and Industrial Technology Development Organization
Japan External Trade Organization
National Institute for Environmental Studies
The Federation of Economic Organizations
Nanotechnology Business Creation Initiative
In cooperation with: The Japan Society of Applied Physics, The Society of Polymer Science, Japan, The Chemical Society of Japan
Size of Exhibition: 603 Companies, 909 Booths
Expected number of visitors: 50,000
Admission fee: 3,000 Japanese Yen(Free admission with online registration)
Concurrent Exhibition:
Nano Bio Expo 2009
ASTEC2009
METEC'09
neo functional material 2009
Convertech JAPAN 2009
PRINTABLE ELECTRONICS 2009
登録:
投稿 (Atom)